23/07/2024

Bali Sandblasting

Transforming Bali, One Blast At A Time

Safety Measures for Dry Ice Blasting

Safety Measures for Dry Ice Blasting

Dry ice blasting is a modern method for industrial cleaning which is done with the help of a dry blaster. The blaster is loaded with particles of dry in a huge quantity which are shot out with force and help to clean any unwanted wreckage or debris on surfaces. In broader terms, dry ice is created by freezing carbon dioxide. Cooler than ice, Its also used in stores to keep soft and hard drinks cold before they are purchased. This method of industrial cleaning can be very dangerous if done without taking any precautionary measures. It is important that you follow all the safety rules before opting for this procedure.

Protective Wear

When dealing with a dry blaster, it is advised that the user cover his hands by wearing protective gloves. Thermal gloves, for instance, provide protection even in low temperatures, so in case you touch the ice accidentally, you will remain safe. Moreover, a face shield must also be used to keep your face from coming in contact with the dry ice while the blasting is being done.

Measures for Electrical Safety

Both the dry ice blaster and other associated equipment must be handled with great care and attention. Before beginning the dry blasting procedure, it is important that you check all the equipment for any loose wires or openings. In addition to this, also check your electrical circuits; avoid using them if they appear to be damaged.a face shield must also be used to keep your face from coming in contact with the dry ice while the blasting is being done.

Blaster Hose Safety

Never work with loose hose fittings. Use a wrench when a fitting needs to be tightened and refrain from using the hose above the recommended pressure. Once the dry blasting is complete, leave the hose alone for a while so that all the air is released and then unplug it from the dry blaster. Do not disconnect the hose during operations.In addition to this, also check your electrical circuits; avoid using them if they appear to be damaged.

Safety During Operations

It is advised that a dry ice blaster should always be used in open spaces. A well ventilated area, for example, is ideal for this procedure since it will keep the risk of accidents to a minimum and will limit the exposure to the ever harmful carbon dioxide. Remember, never to point the blaster at another individual, keep it in the place that needs to be cleaned and carefully unplug all equipment as soon as the process of blasting is complete.